Boosters



Please select a product below:

Overview

RFD Australia is ISO 9001 certified and Original Equipment Manufacturer trained and endorsed company with extensive experience in supplying and servicing HASKEL liquid pumps, gas boosters and air pressure amplifiers. Our service facility has been over the years supporting Marine & Aerospace Industry, Oil, Gas & Offshore Industry, Mining & Power Industry, Defense force and large Petrochemical companies to name just a few.

The unique design of HASKEL pumps, boosters and amplifiers offers:

  • Air driven - no electrical requirement
  • No airline lubricator required
  • Hydrocarbon free - separation between air and gas selection
  • No heat, flame or spark risk
Haskel - Air & Hydraulic Gas 
Haskel - Air and Hydraulic Gas
Features

Haskel International Air and Hydraulic Driven Gas Boosters provide for pressures up to 39,000 psi (2690 bar). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

Key features include:

  • Air driven - no electricity required
  • No airline lubrication required
  • Hydrocarbon free - separation between air and gas sections
  • Pressures to 39,000 psi (2690 bar)
  • Wide range of models
  • Built-in cooling on most models
  • Standard and custom systems available
Haskel - Air Driven Liquid Pumps 
Haskel - Air Driven Liquid Pumps
Features

Air driven liquid pumps work on an automatic reciprocating differential area principle that uses a large area air drive piston connected to a smaller area hydraulic piston to convert compressed air power into hydraulic power. There are 170 models available with maximum pressure up to 100,000 PSI.

  • Air drive line lubrication not required
  • Self-priming for immediate operation
  • Compatible with all hydraulic fluids, plain water, distilled and de-ionized water, solvents, mild chemicals and most liquefied aerosol type gases
  • Range of models to provide up to 80,000 psi intermittent output pressure
  • Stainless steel hydraulic body, check valves, and trim are std, except -4 and -7 models
  • Alternative gases that can drive the pump include nitrogen, vapor from liquified gas, pipeline natural gas and sour natural gas with proper modifications
  • Offer a wide range of std modifications
Haskel - Air Driven Gas Boosters 
Haskel - Air Driven Gas Boosters
Features

Air and Hydraulic Driven Gas Boosters are supplied in 3 types and 43 models to provide for pressures up to 39,000 PSI. Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

  • High pressure capability - up to 25,000 PSI
  • Boost directly from unregulated high pressure gas cylinders or pipelines
  • Maintain gas purity. One-man portable
  • No electrical or cooling connections needed
  • Intrinsically safe
  • Boost virtually any noncorrosive industrial or laboratory gas
  • Simple maintenance
  • Mount in any position
  • Weatherproof
Haskel - Air Driven Air Pressure Amplifiers 
Haskel - Air Driven Air Pressure Amplifiers
Features

An air pressure amplifier is an air pump that is driven by part of the incoming compressed air supply enabling it to cycle and pump the balance of the supply to a higher output pressure. They are supplied in 5 types and 15 models with maximum delivery pressure 45000 PSI.

Haskel - High Pressure Components 
Haskel - High Pressure Components
Features
  • Pressure Relief Valves
  • High Pressure, Low Flow Pilot Cutoff Valves
  • High Pressure Components
  • Normally open, Normally closed, air pilot actuated
  • Inline check valves, 316 stainless steel bodies
  • Air operated on/off valve
  • Intensifier Assembly 10:1 ratio
  • Gas receivers
Haskel - Air Movers 
Haskel - Air Movers
Features

The Jetflow Airmover is operated by compressed air and products a high velocity jet of air which is ideal for safe and effective auxilliary ventiliation. In generating the high velocity jet a negative pressure is created at the inlet which enables the Jetflow Airmovers to extract fumes, move light materials, lift liquids and power suction lift devices.

Key features:

  • Safe operation
  • No moving parts
  • No electrics
  • Minimum maintenance
  • Easy to install
  • Easy to control
  • Compact
  • Portable
  • Robust
  • Quiet operation
Haskel - Test Packs 
Haskel - Test Packs
Features

RFD Australia design and manufacture a range of Test Packs for Hydrostatic testing of various applications such as - hoses, piping, receivers, valves, proof testing etc.

With no electricity required, these Test Packs are ideal for use in many industries including:

  • Mining
  • Hyperbaric
  • Food processing
  • Hydraulics
  • Fire protection
  • Oil & Gas
  • Aviation
  • Marine
  • Medical
  • Utilities
Haskel - TP-33 Range Test Packs 
Haskel - TP-33 Range Test Packs
Features

The TP-33 range Test Packs are powered by HASKEL air driven liquid pumps with hand attachment for precise pressure control. Mounted in heavy duty stainless steel frame with 35lt water container, this range is ideal for workshop testing as well as for mobile testing in remote ares.

TP-33 range covers:

  • TP-33 MS-21 Max. test press. 2600 PSI
  • TP-33 MS-36 Max. test press. 4500 PSI
  • TP-33 MS-71 Max. test press. 8800 PSI
  • TP-33 MS-110 Max. test press. 10000 PSI
Haskel - TP-200 Range Test Packs 
Haskel - TP-200 Range Test Packs
Features

The TP-33 range Test Packs are powered by HASKEL air driven liquid pumps. Mounted in heavy duty stainless steel frame with 15lt water container and constant water inlet. This range is ideal for testing of larger items up to 20000PSI

TP-200 range covers:

  • TP-200 ASF-25 Max. test press. 4000 PSI
  • TP-200 ASF-60 Max. test press. 9800 PSI
  • TP-200 ASF-100 Max. test press. 15000 PSI
  • TP-200 ASF-150 Max. test press. 20000 PSI