Fire Suppression Systems



PLEASE CALL US AT 02 9330 7000 TO RECEIVE A FREE, NO OBLIGATION QUOTE
Please select a category below:



Firepro 
Firepro

FIREPRO Aerosol Suppression system is an Ozone friendly and Cost effective fire suppression system. Firepro is an exciting innovation in fire industry. It does not use any high pressure cylinders, pipework and does not require expensive maintenance and is suitable for all types of risk. It is environment friendly.

Sprinkler System 
Sprinkler System

RFD has the ability to design, install and commission the Fire Sprinkler system. We take into account the integration of sprinkler with other fire systems of the building to formulate the most effective design. We work with almost all types of sprinkler heads as required by the job. We also provide ongoing maintenance of the sprinkler systems.

Fire Hydrant System 
Fire Hydrant System

RFD has the ability to provide series of booster assemblies to meet the requirement of the local authority. We provide the wide range of service in hydrant system including design, installation, commissioning and ongoing maintenance of the system inclusive of hydrant pumps (electric/diesel etc) where applicable.

Other Pre Engineered Systems 
Other Pre Engineered Systems

RFD also caters for design, installation andcommissioning of several pre engineered fire suppression systems like, server room, kitchen system, vehicle system, marine etc. They include FM200, foam, powder, Co2, aerosol etc. (details)

Firepro 

An aerosol fire extinguisher which makes it possible to protect risk areas which were previously uneconomical to protect.

Features
  • Non-pressurized container
  • Ozone and environmentally friendly
  • Non corrosive
  • Non toxic - will not harm people, animals or plants
  • Autonomous and automatic
  • Stainless steel outer cylinder available for marine conditions
  • UL Approval applies to FirePro extinguishers 200g and above
FP-8 
FP-8
Features
Mass of Extinguishing Material 8 gr
Maximum Protected Volume 0.182 m3
Activation mode/s Thermally activated Thermocord at 1720°C
Weight
Gross
Net

17 gr
8 gr
Operation (Discharge) Time 3 - 6 seconds
Discharge Outlets 1
Dimensions 14 mm x 52mm (diameter)
Q-factor (basic qty/m3) 32 gr
Self activation temp of fire
extinguishing material

170°C
Classes of Fire A,B(E)
FP-20 
FP-20
Features
Mass of Extinguishing Material 20 gr
Maximum Protected Volume 0.218m3
Activation mode/s Thermally activated Thermocord at 1720°C
Weight
Gross
Net

96 gr
20 gr
Operation (Discharge) Time 3 - 6 seconds
Discharge Outlets 2
Dimensions 128 mm x 28 mm (diameter)
Q-factor (basic qty/m3) 40 gr
Self activation temp of fire
extinguishing material

300°C
Classes of Fire A,B(E)
FP-20E 
FP-20E
Features
Mass of Extinguishing Material 20 gr
Maximum Protected Volume
Activation mode/s
6/12/24v DC min 0.8A for 3-4 secs
Thermocord 172°C
Activator Heating element with 2.3 Ohm resistance
Testing Current Max 5mA
Weight
Gross
Net

105 gr
Operation (Discharge) Time 3 - 6 secs
Discharge Outlets 2
Dimensions 128 mm x 30 mm
Q-factor (basic qty/m3)
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
FP-80 
FP-80
Features
Mass of Extinguishing Material 80 gr
Activation mode/s Electrical 6/12/24v DC min 0.8A for 3-4 secs
Thermocord 172°C
Activator Heating Element with 2.3 Ohm resistance
Weight
Gross
Net

800 gr
Operation (Discharge) Time 4 - 8 secs
Discharge Outlets 2
Dimensions 180mm x 50mm (diameter)
Q-factor (basic qty/m3)
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
FP-100 
FP-100
Features
Mass of Extinguishing Material 100 gr
Maximum Protected Volume 1.12 m3
Activation mode/s Electrical (12V D/C 0.8A 3-4 secs)
Thermally activated Thermocord at 1720°C
Activator Heating element with 1 Ohm resistance
Testing Current Max. 5mA
Weight
Gross
Net

840gr
100gr
Operation (Discharge) Time 5 - 10 seconds
Discharge Outlets 1
Dimensions 125 mm x 88 mm (diameter)
Q-factor (basic qty/m3) 40 gr
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A, B (E)
FP-200 
FP-200
Features
Mass of Extinguishing Material 200 gr
Maximum Protected Volume 2.24 m3
Activation mode/s Electrical (12V D/C 0.8A 3-4 secs)
Thermally activated Thermocord at 1720°C
Activator Heating element with 1.5 Ohm resistance
Testing Current Max. 5ma
Weight
Gross
Net

980 gr
200 gr
Operation (Discharge) Time 10-15 seconds
Discharge Outlets 1
Dimensions 125mm x 88mm (diameter)
Q-factor (basic qty/m3) 40 gr
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A,B(E)
FP-200M 
FP-200M
Features
Mass of Extinguishing Material 200 gr
Activation mode/s Manual by pulling metal ring
connected to a safety pin
Activator Chemical element with 1.5 Ohm resistance
Testing Current N/A
Weight
Gross

1430gr
Operation (Discharge) Time 10-15 secs
Discharge Outlets 1
Dimensions 145mm x 88mm (diameter)
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
FP-500 
FP-500
Features
Mass of Extinguishing Material 500 gr
Maximum Protected Volume 5.58 m3
Activation mode/s Electrical (12V D/C 0.8A 3-4 secs)
Thermally activated Thermocord at 172°C
Activator Heating element with 1 Ohm resistance
Testing Current Max .5mA
Weight
Gross
Net

2700 gr
500 gr
Operation (Discharge) Time 10-15 seconds
Discharge Outlets 1
Dimensions 260mm x 88mm (diameter)
Q-factor (basic qty/m3) 40gr
Self activation temp of fire
extinguishing material

300°C
Classes of Fire A, B (E)
FP-1000M 
FP-1000M
Features
Mass of Extinguishing Material 1000 gr
Activation mode/s Manual by pulling metal ring
connected to a safety pin
Activator Chemical element with 1.5Ohm resistance
Testing Current N/A
Weight
Gross

1680 gr
Operation (Discharge) Time 20-25 secs
Discharge Outlets 1
Dimensions 200mm x 88mm (diameter)
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
FP-1200 
FP-1200
Features
Mass of Extinguishing Material 1200gr
Activation mode/s Electrical 6/12/24v DC min 0.8A for 3-4 secs
Thermally activated Thermocord at 172°C
Activator Heating element with 2.3Ohm resistance
Testing Current Max 5mA
Weight
Gross

5600 gr
Operation (Discharge) Time 8-10 secs
Discharge Outlets 1
Dimensions 670mm x 85mm (diameter)
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
FP-2000 
FP-2000
Features
Mass of Extinguishing Material 2000gr
Activation mode/s Electrical 6/12/24v DC min 0.8A for 3 - 4 secs
Thermally activated Thermocord at 172°C
Activator Heating element with 2.3Ohm resistance
Testing Current Max 5mA
Weight
Gross

14100gr
Operation (Discharge) Time 10-15 secs
Discharge Outlets 1
Dimensions 300mm 300mm x 185mm
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
FP-3000 
FP-3000
Features
Mass of Extinguishing Material 3000gr
Activation mode/s Electrical 6/12/24v DC min 0.8A for 3-4 secs
Thermally activated Thermocord at 172°C
Activator Heating element with 2.3 Ohm resistance
Testing Current Max 5mA
Weight
Gross

15000gr
Operation (Discharge) Time 15-20 secs
Discharge Outlets 1
Dimensions 300mm x 300mm x 185mm
Q-factor (basic qty/m3)
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
FP-5700 
FP-5700
Features
Mass of Extinguishing Material 5700gr
Activation mode/s 6/12/24v DC min 0.8A for 3-4 secs
Thermally activated Thermocord at 172°C
Activator Heating element with 2.3 Ohm resistance
Testing Current Max 5mA
Weight
Gross

23700gr
Operation (Discharge) Time 15-20 secs
Discharge Outlets 1
Dimensions 300mm x 300mm x 300mm
Self activation temp of fire
extinguishing material
300°C
Classes of Fire A B E
Marine Console Detection Panel 
Marine Console Detection Panel
Features
Pre-Engineered Systems 

RFD offers QUALITY and INNOVATIVE fire fighting systems for many applications.

These pre-engineered systems can be purpose configured to suit your requirements and include automatic restaurant systems, vehicle fire suppression systems, gas detection, industrial systems and fire detection devices.

Marine Systems 
Marine Systems
Features

This clean agent FM200 system is suitable for machinery spaces and other class B hazards and offers the best combination of life safety and fire performance.

Industrial Systems 
Industrial Systems
Features

The Amerex Industrial fire suppression system is a pre-engineered, wet chemical, stored pressure type with a fixed nozzle agent distribution network. It uses fewer cylinders, nozzles and less pipe which saves on installation and maintenance costs. It incorporates an automatic detection system that will operate in case of fire anytime, 24/7, even if no one is present.

Kitchen Systems 
Kitchen Systems
Features

The Amerex Zone Defence automatic restaurant and catering fire suppression system is a pre-engineered, wet chemical, self contained, stored pressure system with a fixed nozzle agent distribution network. The Zone defence system uses pneumatic detection tubing.

Restaurant Systems 
Restaurant Systems
Features

The Amerex KP automatic restaurant and catering fire suppression system is a pre-engineered, wet chemical, self contained, stored pressure system with a fixed nozzle agent distribution network. The KP system uses fusible links as detection. The Amerex KP system has both LPCB (LPS 1223) and UL approvals.

Vehicle Systems 
Vehicle Systems
Features

The Amerex Vehicle Fire Suppression Systems are designed to warn the operator and suppress the fire, protecting both people and equipment. Fire suppression agent is delivered to hazard areas by fixed high capacity fast flow machined brass nozzles. An AMGADS gas detection system for LPG and alternative fuel vehicles can be fitted alongside the fire suppression system or in isolation.